Leica or Leicaflex lenses on the EOS 5D
About the time I was ordering the Canon EOS 5D it dawned on me that it would be nice to be able to use my Leica Telyt long focus lenses on the digital body. I have a 200mm f/4 which is quite decent and a 400mm f/6.8, the one with the trombone focus action, which is very good. Both were made for use on the horrid Leitz Visoflex mirror housing for the Leica M body, but I had been using them on my metered Leicaflex SL SLR (now sold) with a Leitz M to R adapter, code 14127. I finaly got around to selling the Visoflex, but it wouldn’t go without kicking and screaming, as the first eBay buyer was a certified retard who decided he didn’t want to pay. How do these losers get through life? Mercifully, eBay recognized this nut for what he is and deleted his slanderous, retaliatory feedback. A small nod in the direction of decency and honesty!
Sniffing around the internet, it became obvious that there was quite a number of adapter manufacturers who promised that Leicaflex lenses could be mounted on an EOS body. Prices ranged up to some $200. I bought one from Kiev Camera in the USA for $50, but promptly had to return it as it had a faulty lens locking pin. The folks at Kiev Camera sent me another one and that one works really well.
As you can see, the order of events is Telyt lens, M to R adapter and then R to EOS adapter. The 200mm Telyt shown here, being a truly ancient design, also has a Leica screw to Leica M adapter, # 14166. Despite all these adapters, the whole thing feels rock solid once assembled.
While the Telyt lenses are manual, indeed the 400mm does not even have preset stops, use is easy with the 5D on aperture priority. Indeed, that’s the only way you can use it as the camera has no idea what is fitted, as there are no electronics to feed it the information. So you set the shutter and the camera choses the shutter speed. Focusing is also manual, as once again the lack of electronics defeats the focus confirmation light ordinarily seen in the viewfinder. No matter. The standard screen in the 5D works just fine with these long, slow lenses. For this very occasional long lens user the setup suffices, even though Rube Goldberg might be proud of the design! Both lenses preserve full focus to infinity with this arrangement.
You can see some snaps taken with this combination here. For results with the magnificent 400mm Telyt, please click here.
But wait. The plot thickens. In going through all my gear trying to sell anything that was no longer used, I came across a near new El Nikkor 50mm enlarging lens which I had last used in those mercifully long past, dreary darkroom days. That would be 29 years ago. As any Leica user will tell you, sooner or later you end up in adapter hell, as Leitz made adapters for seemingly everything. They must love the art of machining in Wetzlar and, indeed, their adapters are things of mechanical beauty. The El Nikkor uses a Leica thread mount. A few seconds later and it’s converted to Leica M bayonet with an adapter from the dark recesses of the cupboard where all my remaining junk hides. A separate adapter, # 16596 if you must know, converts my old Leica Bellows II, another remnant of the Visoflex years, into Leica M mount. Attach the M to Leicaflex to EOS adapter on the back and you have a free macro lens:
This gives larger than life images and, of course, infinity focus is not possible. Still, have you tried to sell an enlarging lens recently?
A better use is with the superbly sharp 135mm Leica Apo Telyt lens which gives images 2/3rds life size and also affords a far greater lens to subject difference allowing for better illumination of the subject. Nice to give these old warhorses a new lease of life.