The new AppleTV lacks traditional coaxial analog connectors for sound output; it comes with an optical Toslink sound output socket only. So if you want to route the AppleTV’s sound output to external speakers via an analog external amplifier\/receiver lacking a digital optical sound input, you need a Digital Analog Converter (DAC). Speakers (and amplifiers, for that matter) built into TV sets are generally poor quality so bypassing them and using external loudspeaker boxes connected to a receiver ensures better sound.<\/p>\n
There are two versions of the DAC, depending whether your sound system is 2 speakers and an optional subwoofer (2.1) or four corner speakers, a center and a subwoofer (5.1).<\/p>\n
My Sony receiver is not that old yet it lacks a Toslink connector for optical digital sound, meaning I had to interpose a DAC between the AppleTV and the Sony. Adding a new digital receiver makes no economic sense, so I bought a Gefen DAC. There are two models.<\/p>\n
- \n
- For 2.1 sound – use this one<\/a>. $58 at the time of writing. This is the one I use.\n
- For 5.1 sound – this one<\/a>. $91.\n<\/ul>\n
I went with the Gefen – cheaper units are available – as research disclosed it was known to work with the AppleTV.<\/p>\n
![\"\"](\"http:\/\/www.pindelski.org\/Blog\/AppleTV_DAC.jpg\")
<\/p>\nRed circle denotes removed rubber Toslink covers. Green arrows show Toslink cable connections.
\nApple Remote included for scale. Gold connectors route two channel analog sound to the receiver. iPad backdrop.<\/i><\/center><\/p>\nAs the specifications are silent I also purchased a short Toslink optical fiber cable only to find that Gefen includes one in the box with the DAC! So save $6 and don’t buy a separate cable. Then I ran into a serious snag. I had never so much as seen a Toslink cable before and, no matter how I tried, I could not get the flimsy connector to stay in either the Gefen or AppleTV sockets. After a spot of head scratching and Googling, it transpired that the optical ends of the connector are covered with translucent rubber caps, circled in the above picture. Removing these allowed the connectors to fit at both ends. Duh! I knew that engineering degree would come in handy one day ….<\/p>\n
After that it was plain sailing. I switched off the TV’s speakers, connected the AppleTV to the Gefen and routed my two RCA coaxial cables from the Gefen DAC to the Sony receiver. The DAC comes with a small power supply so you will have to search out yet another adapter to make it fit your already overburdened power strip. The red LED on the DAC confirms it’s getting power but in practice you will hide it out of the way.<\/p>\n
The sound is excellent, the Sony receiver’s volume control is set at half way through the scale so clearly the amplifier is being adequately driven by the DAC and, equally importantly, not overdriven. The TV remains connected using an HDMI cable (for video) and the orange cable you can see connected to the AppleTV is for wired internet. I use wired in preference to wireless as the AppleTV sits right next to my broadband modem and I always prefer wired to wireless, having grown up in a world where men were men, cars had carburettors and the word ‘digital’ was not in common use. The small cable routed to the front bezel of the AppleTV is the optical sender from my IR blaster.<\/p>\n
Check the Comments to this article to learn how the HDMI and Toslink sound outputs interact.<\/p>\n
I have to add that until now I have always thought the USB connector to be one of the worst designed on the planet, and just slightly better than the Firewire800 one. Well, it must now take the runner’s up place to the Toslink one which, though keyed, is so small that you have to look awfully hard for the keyways, for some reason only fits one way (nonsensical for an optical signal) and will leave you scratching your head because of those little rubber covers about which the instructions are silent.<\/p>\n
We now enjoy premium quality video and<\/i> sound from the new AppleTV and greatly enjoy watching our photo slideshows with the help of this handy little device, as well as listening to our music and watching Netflix and iTunes movies.<\/p>\n","protected":false},"excerpt":{"rendered":"
Adding a DAC. Part II appears here. The new AppleTV lacks traditional coaxial analog connectors for sound output; it comes with an optical Toslink sound output socket only. So if you want to route the AppleTV’s sound output to external speakers via an analog external amplifier\/receiver lacking a digital optical sound input, you need a … Continue reading The new AppleTV – Part III<\/span>
- For 5.1 sound – this one<\/a>. $91.\n<\/ul>\n